NABL Test Report for Oil Control Face Wash for Oily and Acne-Prone Skin
Oil Control Face Wash for Oily and Acne-Prone Skin -250ml: NABL Lab Test Report
NABL lab test report for Oil Control Face Wash for Oily and Acne-Prone Skin -250ml: heavy metals not detected, pathogens absent and pH 6.99. Batch BAM5K014.
Safety Summary: Oil Control Face Wash for Oily and Acne-Prone Skin -250ml
Is Oil Control Face Wash for Oily and Acne-Prone Skin -250ml safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-15193). The tested sample, from batch BAM5K014, was analysed against the limits in the referenced standards.
Free from lead and arsenic. The report found no detectable lead or arsenic - both were below the laboratory's detection limit of 0.25 mg/kg.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 6.99, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens, silicones or mineral oil. It cleanses using milder amino-acid surfactants - sodium lauroyl sarcosinate, cocamidopropyl betaine and betaine anhydrous. Preservation uses phenoxyethanol, sodium benzoate and ethylhexylglycerin.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, silicones, mineral oil and any detectable lead or arsenic.
What these results cover. The laboratory findings apply to the tested sample from batch BAM5K014 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | Black viscous liquid | - | STRC/STP/F256 |
| Colour | Black | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 6.99 | - | IS:7884:2004 |
| Foam Height, for 2% solution, mm | 102 | - | IS:7884:2004 |
| Active Detergent Content, % w/w | 0.63 | - | STRC/STP/P020 |
| Specific Gravity | 1.052 | - | STRC/STP/P062 |
| Viscosity (Temp:26.4C,RPM:20,SPL | 7365 | - | Indian Pharmacopoeia |
| Heavy Metals | |||
| Lead (as Pb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | - | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | - | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | - | IS:14648:2011 |
| Candida albicans, per gm | Absent | - | IS:14648:2011 |
Understanding These Tests for Oil Control Face Wash for Oily and Acne-Prone Skin -250ml
Physical & Organoleptic
On the tested sample, Oil Control Face Wash for Oily and Acne-Prone Skin -250ml was recorded as a black viscous liquid, black in colour and with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 6.99, foam Height, for 2% solution 102 mm, active Detergent Content 0.63 % w/w, specific Gravity 1.052 and viscosity (Temp:26.4C,RPM:20,SPL 7365, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Heavy Metals
In this report, Oil Control Face Wash for Oily and Acne-Prone Skin -250ml showed no detectable lead or arsenic - each below the laboratory's detection limit of 0.25 mg/kg.
Heavy metals can enter a product through raw materials or manufacturing.
Microbial Counts
Oil Control Face Wash for Oily and Acne-Prone Skin -250ml recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of Oil Control Face Wash for Oily and Acne-Prone Skin -250ml, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Oil Control Face Wash for Oily and Acne-Prone Skin -250ml |
| Parameters Measured | physical and organoleptic properties, chemical parameters, heavy metals, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:7884:2004; IS:14648:2011 |
| Sample Tested | BAM5K014 (250 ml x 1) |
About Oil Control Face Wash for Oily and Acne-Prone Skin -250ml
Tired of the daily struggle with oily skin, clogged pores, and dull skin? Bring back flawless skin that looks youthful and oil-free with the power of Activated Charcoal & Coffee. Crafted with the goodness of nature, Mamaearth Charcoal Face Wash pulls out toxins and impurities from deep within the pores. The goodness of Coffee tightens skin pores and promotes even skin tone to give you an oil-free glowing complexion. Activated Charcoal is the gold-standard natural ingredient that draws out toxins, oil, and dirt from your skin to keep it healthy and glowing. And because of our no toxins and no h
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| No detectable heavy metals | Lead and Arsenic reported Not Detected at a detection limit of 0.25 mg/kg. | Lab report 13042771/N |
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13042771/Z |
| Sulphate-free cleansing base | Formulated with sodium lauroyl sarcosinate, cocamidopropyl betaine and betaine anhydrous in place of SLS/SLES. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-15193) |
| ULR Number | TC1519325000008018F |
| Report No. | 13042771/N, 13042771/Z |
| Report Issue Date | 20/11/2025 |
| Testing Period | 08/11/2025 to 18/11/2025 |
| Batch Tested | BAM5K014 (Mfg. 11/2025; use before 30 months) |
| Standards Referenced | IS:7884:2004; IS:14648:2011 |
| Authorised Signatory | Shruti Vij, Technical Manager, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The listed heavy metals were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Key Ingredients in Oil Control Face Wash for Oily and Acne-Prone Skin -250ml
Descriptions are the brand's own, from the product page.
| Ingredient | Brand description |
|---|---|
| Activated Charcoal | "It has great detoxifying benefits that include absorbing excess oil and deep cleaning pores." |
| Coffee | "With excellent antioxidant and anti-inflammatory properties, Coffee soothes the skin, tightens pores, and promotes even skin tone by reversing the harmful effects of sun exposure." |
| Aloe Vera | "It soothes, hydrates, and nourishes the skin gently. Enriched with antioxidative properties, it relieves irritated skin and moisturizes with care." |
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Cleansing System
| Component | Role in the formulation |
|---|---|
| Sodium Lauroyl Sarcosinate | Amino-acid-based surfactant used in place of sulphates. |
| Cocamidopropyl Betaine | Mild coconut-derived surfactant for gentle cleansing and foam. |
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Sodium PCA | Natural moisturising factor that holds water in the skin. |
| Betaine Anhydrous | Humectant derived from sugar beet. |
| Charcoal Powder | Activated charcoal used in purifying and detox formulas. |
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Panthenol | Pro-vitamin B5 humectant supporting moisture and elasticity. |
| Kaolin | Clay used to absorb surface oil. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Glycerin | Humectant that draws water into the skin surface. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua (Water) | Solvent base of the formulation. |
| Sodium Hydroxide | Adjusts the pH of the formulation. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
| Sodium Benzoate | Preservative effective in acidic formulations. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No silicones | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
| Panthenol (Pro-Vitamin B5) | Topical dexpanthenol is documented to support hydration and barrier function (Proksch E, et al. Am J Clin Dermatol. 2009;10(6):359-367). | Supports panthenol for moisture retention and elasticity. |
| Aloe Vera | Aloe vera has documented moisturising and soothing properties in dermatological use (Surjushe A, et al. Indian J Dermatol. 2008;53(4):163-166). | Supports aloe vera as a soothing and hydrating botanical. |
| Tea Tree Oil | Tea tree oil has documented antimicrobial and anti-inflammatory activity (Carson CF, et al. Clin Microbiol Rev. 2006;19(1):50-62). | Supports tea tree oil in blemish-focused formulations. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Oil Control Face Wash for Oily and Acne-Prone Skin -250ml. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Oil Control Face Wash for Oily and Acne-Prone Skin -250ml is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Oil Control Face Wash for Oily and Acne-Prone Skin -250ml
The results on this page come from laboratory testing of a sample from batch BAM5K014. See the complete ingredient list, current offers and reviews on the product page. Learn more about Aloe Vera and Charcoal. You can also explore other products in this category.
View ProductFrequently Asked Questions
A: Yes. In this report, Lead and Arsenic were reported below the laboratory's stated detection limit of 0.25 mg/kg at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193).
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 6.99.
A: The published ingredient list for this product contains no sulphates, parabens, silicones or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified method. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC1519325000008018F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch BAM5K014 (manufactured 11/2025). The laboratory report states the tested sample as 250 ml x 1. Results refer only to the tested sample and the parameters listed.
References
- IS:7884:2004. Bureau of Indian Standards.
- IS:14648:2011. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13042771/N, 13042771/Z.
