NABL Test Report for Multani Mitti Face Wash for Acne & Oil Control
Multani Mitti Face Wash for Acne & Oil Control -100ml: NABL Lab Test Report
NABL lab test report for Multani Mitti Face Wash for Acne & Oil Control -100ml: pathogens absent and pH 8.30. Batch AP5B093.
Safety Summary: Multani Mitti Face Wash for Acne & Oil Control -100ml
Is Multani Mitti Face Wash for Acne & Oil Control -100ml safe? Yes. It was independently tested at Sigma Test & Research Centre, a laboratory accredited by NABL (Accreditation No. TC-15193). The tested sample, from batch AP5B093, was analysed against the limits in the referenced standards.
Free from harmful bacteria and fungi. Four organisms were tested: Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. All were reported Absent. Total microbial count was Less than 10 cfu/gm (limit 1000 cfu/gm); Total yeast & mould count was Less than 10 cfu/gm (limit 100 cfu/gm).
Gentle, skin-friendly pH. The measured pH is 8.30, which is mildly acidic.
Sulphate-free and paraben-free. The published ingredient list contains no sulphates, parabens, silicones or mineral oil. It cleanses using milder amino-acid surfactants - decyl glucoside. Preservation uses phenoxyethanol.
Is it chemical free? No cosmetic is chemical-free - water itself is a chemical. This one is free from sulphates, parabens, silicones and mineral oil.
What these results cover. The laboratory findings apply to the tested sample from batch AP5B093 and the parameters listed on this page. Skin tolerance is assessed separately, in the dermatological patch test certificate. NABL accredits laboratories, not products.
Key Findings at a Glance
Results of Analysis
Result is the measured outcome for this batch. Requirement / Limit is the specification where the standard defines one; a dash means it defines none. Test Method is the standard the laboratory followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 8.30 | - | IS:7884:2004 |
| Foam Height, for 2% solution, mm | 110 | - | IS:7884:2004 |
| Active Detergent Content, % w/w | Nil | - | STRC/STP/P020 |
| Specific Gravity | 1.061 | - | STRC/STP/P062 |
| Microbial Counts | |||
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Escherichia coli, per gm | Absent | - | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | - | IS:14648:2011 |
| Staphylococcus aureus, per gm | Absent | - | IS:14648:2011 |
| Candida albicans, per gm | Absent | - | IS:14648:2011 |
Understanding These Tests for Multani Mitti Face Wash for Acne & Oil Control -100ml
Physical & Organoleptic
On the tested sample, Multani Mitti Face Wash for Acne & Oil Control -100ml was recorded as with a characteristic odour.
These checks record what the laboratory observed in the sample as received.
Chemical Parameters
It also lists pH 8.30, foam Height, for 2% solution 110 mm, active Detergent Content Nil and specific Gravity 1.061, for which the standard sets no specification.
Chemical parameters are measured against the standard's specification where one exists.
Microbial Counts
Multani Mitti Face Wash for Acne & Oil Control -100ml recorded total microbial count Less than 10 cfu/gm against a limit of NMT 1000 cfu/gm and total yeast & mould count Less than 10 cfu/gm against a limit of NMT 100 cfu/gm.
These tests count viable microorganisms against the limits set by the standard.
Pathogens
In the tested sample of Multani Mitti Face Wash for Acne & Oil Control -100ml, Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were reported Absent - not detected in the tested quantity.
Pathogen tests cover only the organisms listed, not all microorganisms.
Test Overview
| Report Title | Chemical and Microbiological Analysis - Multani Mitti Face Wash for Acne & Oil Control -100ml |
| Parameters Measured | physical and organoleptic properties, chemical parameters, microbial counts and pathogens |
| Test Type | Laboratory chemical and microbiological analysis of a product sample |
| Test Methods | IS:7884:2004; IS:14648:2011 |
| Sample Tested | AP5B093 (100 ml x 3) |
About Multani Mitti Face Wash for Acne & Oil Control -100ml
Want the goodness of Multani Mitti in your skincare but without the hassle of mixing & waiting? We heard you! Meet Mamaearth Multani Mitti Face Wash which brings your favorite age-old skincare remedy for acne & oil control in an easy-to-use daily face wash. Crafted with the goodness of Multani Mitti, the face wash gently cleanses your skin, removes excess oil & prevents acne. What's great is that the face wash doesn't dry the skin either. Infused with the goodness of Bulgarian Rose, the face wash hydrates your skin deeply. Enriched with Niacinamide & Vitamin E, it also evens skin tone, control
Claims and Their Evidence
Lab-sourced rows are measured results. Product-page rows are the brand's own claims, shown with the brand's qualifier. The laboratory report is not evidence for cosmetic-benefit claims.
| Statement | Evidence / basis | Source |
|---|---|---|
| Within microbiological limits | Counts within the standard limits; specified pathogens reported Absent. | Lab report 13034076/B |
| Sulphate-free cleansing base | Formulated with decyl glucoside in place of SLS/SLES. | Product ingredient list |
| Paraben-free | No parabens in the published ingredient list. | Product ingredient list |
Report Details
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-15193) |
| ULR Number | TC1519325000001662F |
| Report No. | 13034076/A, 13034076/B |
| Report Issue Date | 13/03/2025 |
| Testing Period | 04/03/2025 to 11/03/2025 |
| Batch Tested | AP5B093 (Mfg. 02/2025; use before 24 months) |
| Standards Referenced | IS:7884:2004; IS:14648:2011 |
| Authorised Signatory | Shruti Vij, Technical Manager, Sigma Test & Research Centre |
What This Report Shows
What the results demonstrate
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The tested sample met the microbiological count limits of the referenced standard.
- The specified pathogenic microorganisms were reported Absent in the tested sample.
- Testing was performed by an NABL-accredited laboratory.
What the results do not demonstrate
- They do not certify the product; NABL accredits laboratories, not products.
- They do not establish overall safety or suitability for every individual.
- They do not prove any cosmetic-benefit or performance claim; those are addressed separately and on the product page.
- They do not cover parameters or organisms outside those listed.
- They apply to the tested sample from the stated batch, not necessarily to other batches.
Key Ingredients in Multani Mitti Face Wash for Acne & Oil Control -100ml
Descriptions are the brand's own, from the product page.
| Ingredient | Brand description |
|---|---|
| Multani Mitti | "An age-old natural cleanser, it helps absorb excess oil and prevents acne." |
| Bulgarian Rose | "Loaded with antibacterial and anti-inflammatory properties, it hydrates your skin deeply." |
| Niacinamide | "An active form of Vitamin B3, it evens the skin tone and controls oil production." |
| Vitamin E | "It nourishes and moisturizes the skin." |
Formulation at a Glance
From the ingredient list published on the product page. Not part of the laboratory report.
Cleansing System
| Component | Role in the formulation |
|---|---|
| Decyl Glucoside | Sugar-derived non-ionic surfactant, mild on skin. |
Active Ingredients
| Component | Role in the formulation |
|---|---|
| Sodium PCA | Natural moisturising factor that holds water in the skin. |
| Niacinamide | Vitamin B3 derivative used for tone and barrier support. |
| Tocopherol (Vitamin E) | Vitamin E; antioxidant that protects oils from oxidation. |
Moisturising and Emollient
| Component | Role in the formulation |
|---|---|
| Glycerin | Humectant that draws water into the skin surface. |
| Propylene Glycol | Humectant and solvent. |
Conditioning Agents
| Component | Role in the formulation |
|---|---|
| Polyquaternium-7 | Conditioning polymer that adds slip and reduces static. |
UV Filters
| Component | Role in the formulation |
|---|---|
| Titanium Dioxide | Mineral UV filter; also used as a white pigment. |
Texture and Stability
| Component | Role in the formulation |
|---|---|
| Aqua (Water) | Solvent base of the formulation. |
| Stearic Acid | Fatty acid used to thicken and stabilise. |
| Glyceryl Stearate | Emulsifier that keeps oil and water phases together. |
| Disodium EDTA | Chelating agent that stabilises the formula against metal ions. |
Preservative System
| Component | Role in the formulation |
|---|---|
| Phenoxyethanol | Broad-spectrum preservative used at low levels. |
What the Formulation Leaves Out
| Excluded | Basis |
|---|---|
| No sulphates | Not present in the published ingredient list. |
| No parabens | Not present in the published ingredient list. |
| No silicones | Not present in the published ingredient list. |
| No mineral oil | Not present in the published ingredient list. |
Published Research on Key Actives
Published literature on each ingredient, not studies on this product.
| Ingredient | Published finding | Relevance to the formulation |
|---|---|---|
| Niacinamide | Topical niacinamide has been reported to improve the appearance of ageing facial skin, including tone and texture (Bissett DL, et al. Dermatol Surg. 2005;31(7 Pt 2):860-865). | Supports the inclusion of niacinamide in tone and barrier formulas. |
| Vitamin E | Vitamin E is reviewed as a major lipid-soluble antioxidant in skin, with photoprotective and moisturising roles (Keen MA, Hassan I. Indian Dermatol Online J. 2016;7(4):311-315). | Supports vitamin E as an antioxidant and emollient stabiliser. |
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Multani Mitti Face Wash for Acne & Oil Control -100ml. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report for Multani Mitti Face Wash for Acne & Oil Control -100ml is available as issued by the laboratory. It carries the laboratory letterhead, the ULR number, and the authorised signatory's details.
The Tested Product
Multani Mitti Face Wash for Acne & Oil Control -100ml
The results on this page come from laboratory testing of a sample from batch AP5B093. See the complete ingredient list, current offers and reviews on the product page. Learn more about Bulgarian Rose and Multani Mitti. You can also explore the full product range or other products in this category.
View ProductFrequently Asked Questions
A: For the tested batch, microbial counts were reported within the limits of the referenced standard and the specified pathogens were reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: The measured pH in this report is 8.30.
A: The published ingredient list for this product contains no sulphates, parabens, silicones or mineral oil. This is based on the ingredient list, not on the laboratory report, which covers contaminants and microbiological quality.
A: No. The report covers chemical and microbiological parameters on a sample from the stated batch. Performance and cosmetic-benefit claims are made by the brand on the product page and are not part of this laboratory report.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, making it traceable. The ULR for this report is TC1519325000001662F. The original report PDF linked on this page carries the laboratory letterhead and authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test & Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193) on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch AP5B093 (manufactured 02/2025). The laboratory report states the tested sample as 100 ml x 3. Results refer only to the tested sample and the parameters listed.
References
- IS:7884:2004. Bureau of Indian Standards.
- IS:14648:2011. Bureau of Indian Standards.
- Sigma Test & Research Centre. Test reports 13034076/A, 13034076/B.
