NABL Test Report for Mamaearth Rosemary Anti-Hair Fall Shampoo-2
Lab Test Report: Mamaearth Rosemary Anti-Hair Fall Shampoo - Independently Tested, Results Published
Mamaearth Rosemary Anti-Hair Fall Shampoo was tested at Sigma Test & Research Centre, a laboratory accredited by NABL (National Accreditation Board for Testing and Calibration Laboratories, Accreditation No. TC-15193). This page publishes the complete results of that analysis - every parameter, result, requirement, and test method - along with the report identifiers you can use to verify it.
What Is an NABL Lab Test Report?
An NABL lab test report is the formal record of laboratory analysis performed on a product sample at a laboratory accredited by NABL (National Accreditation Board for Testing and Calibration Laboratories) - India's national accreditation body, operating under the Quality Council of India. NABL accredits laboratories against the international standard ISO/IEC 17025, and its accreditation is recognized globally through the ILAC arrangement.
What is a ULR number? Every test report issued by an NABL-accredited lab carries a Unique Lab Report (ULR) number - a one-of-a-kind identifier that makes the report traceable. The ULR for this report is shown above.
Important: NABL accredits the laboratory, not the product. This page reports the results of testing performed at an NABL-accredited laboratory on the batch stated below - it does not represent a product certification by NABL.
Key Findings at a Glance
Full parameter-by-parameter results, exactly as reported by the laboratory, are published in the tables below.
Report Details
| Attribute | Detail |
|---|---|
| Product / Sample | Mamaearth Rosemary Anti-Hair Fall Shampoo |
| Testing Laboratory | Sigma Test & Research Centre (NABL-accredited, Accreditation No. TC-15193) |
| ULR Number | TC1519325000001718F |
| Report No. | 13034135/A, 13034135/B |
| Report Issue Date | 15/03/2025 |
| Testing Period | 06/03/2025 to 13/03/2025 |
| Batch Tested | AAP5B144 (Mfg. 02/2025; Exp. use before 24 months) |
| Sample Tested | 250 ml x 1 |
| Standards Referenced | IS:7884:2004; IS:14648:2011; Indian Pharmacopoeia 2022 |
| Authorised Signatory | Shruti Vij, Technical Manager, Sigma Test & Research Centre |
Results of Analysis
The tables below reproduce the laboratory's reported results for each testing category. Column meanings: Result is the measured outcome for this batch; Requirement / Limit is the specification where the standard defines one; Test Method is the standard or protocol the lab followed.
| Parameter | Result | Requirement / Limit | Test Method |
|---|---|---|---|
| Physical & Organoleptic | |||
| Appearance | White viscous liquid | - | STRC/STP/F256 |
| Colour | White | - | STRC/STP/F256 |
| Odour | Characteristic | - | STRC/STP/P044 |
| Chemical Parameters | |||
| pH | 5.64 | 4.0 - 9.0 | IS:7884:2004 |
| Foam height for 2% solution, mm | 158 | min 150.0 | IS:7884:2004 |
| Active detergent content, % w/w | Nil | - | STRC/STP/P020 |
| Viscosity (Temp: 25.7C, SPL NO:L3, RPM: 22, Torque: 72.3%), cps | 11679 | - | Indian Pharmacopoeia 2022 |
| Specific gravity | 1.054 | - | STRC/STP/P060 |
| Heavy Metals | |||
| Lead (as Pb), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Arsenic (as As), mg/kg | Not Detected (DL 0.25) | - | STRC/STP/P018 |
| Microbial Counts | |||
| Total Viable Count | - | - | - |
| Total microbial count, cfu/gm | Less than 10 | NMT 1000 | IS:14648:2011 |
| Total yeast & mould count, cfu/gm | Less than 10 | NMT 100 | IS:14648:2011 |
| Pathogens | |||
| Gram Negative Pathogens | - | - | - |
| Escherichia coli, per gm | Absent | - | IS:14648:2011 |
| Pseudomonas aeruginosa, per gm | Absent | - | IS:14648:2011 |
| Other Micro Organisms | - | - | - |
| Staphylococcus aureus, per gm | Absent | - | IS:14648:2011 |
| Candida albicans, per gm | Absent | - | IS:14648:2011 |
Legend: NMT = Not More Than; ND / Not Detected = below the method's detection limit; LOQ = Limit of Quantification; Absent = the organism was not found in the tested quantity; "-" = the standard does not specify a limit for that parameter.
Scope: These results apply to the tested sample from batch AAP5B144 and the parameters listed - as stated on the laboratory report itself.
Understanding These Tests
Each test above answers a specific question about the tested sample. The explanations below describe what each category of test assesses, and what its results do and do not indicate. Only the categories that appear in this report are shown.
Physical & Organoleptic
Physical and organoleptic parameters (such as appearance, colour and odour) record the observable characteristics of the tested sample as received by the laboratory. They document the sample's basic properties and, where the standard defines a description, whether the sample matched it.
Chemical Parameters
Chemical parameters are measured against the specification in the referenced standard, where one exists. They indicate whether the tested sample fell within the specified range for each measured parameter. A value shown without a limit means the standard does not define a specification for that parameter, so the figure is reported for information only.
Heavy Metals
Heavy metals such as lead and arsenic are environmental contaminants that can enter a product through raw materials or manufacturing. This test checks whether the specified metals are detectable in the tested sample. "Not Detected" means the metal was below the laboratory's stated detection limit using the specified method; it supports the absence of the detectable listed metals in this sample, but does not indicate that every possible contaminant was tested.
Microbial Counts
Microbial count tests measure the quantity of viable microorganisms (such as total bacterial and total yeast and mould counts) in the tested sample against the limits defined in the referenced standard. Results within those limits indicate the tested sample met the specified microbiological count limits.
Pathogens
Pathogen tests check for specific microorganisms that a product could pick up during manufacturing or storage. "Absent" means the specified organism was not detected in the tested quantity using the referenced method. These tests cover only the organisms listed, not all possible microorganisms.
What This Report Shows
What this report demonstrates
Based on the laboratory analysis of the tested sample, this report supports the following:
- Physical characteristics of the tested sample were recorded as observed by the laboratory.
- The measured chemical parameters that carry a specification fell within the referenced limits in the tested sample.
- The listed heavy metals (such as lead and arsenic) were below the laboratory's detection limit in the tested sample.
- The tested sample met the microbiological count limits defined in the referenced standard.
- The specified pathogenic microorganisms were reported absent in the tested sample.
- The testing was performed by an NABL-accredited laboratory.
What this report does not demonstrate
These findings apply only to the tested sample and the listed parameters. This report does not establish:
- Product performance or marketing claims, which fall outside the scope of this laboratory test report.
- Clinical efficacy or treatment outcomes, which require separate clinical evaluation.
- Whether the product is suitable for every individual, as skin tolerance and sensitivities vary from person to person.
- The absence of any substance or contaminant beyond the specific parameters listed above.
- Results for any batch other than the one tested; each report covers a single tested batch.
- A product certification by NABL, which accredits the testing laboratory, not the product.
Dermatological Patch Test Certificate
This NABL lab test report covers the chemical and microbiological analysis of Mamaearth Rosemary Anti-Hair Fall Shampoo. Skin tolerance is a separate question, assessed through dermatological patch testing. The dermatological patch test certificate for this product is published on its own page, so you can review the laboratory analysis here and the patch-test findings there as one trust cluster.
View the Original Lab Report
The complete original report is available as issued by the laboratory. It carries the lab's letterhead, the authorised signatory's signature (Shruti Vij, Technical Manager), QR verification and the ULR number TC1519325000001718F shown on this page.
The Tested Product
Mamaearth Rosemary Anti-Hair Fall Shampoo
Independently analyzed at an NABL-accredited laboratory - full results published above. See ingredients, offers and reviews on the product page.
Shop NowAbout Mamaearth Rosemary Anti-Hair Fall Shampoo
Mamaearth Rosemary Anti-Hair Fall Shampoo is formulated with Rosemary and Methi Dana and is positioned for reducing hair loss and breakage, as described on the product page. It is marketed by Honasa Consumer Limited, Gurugram. You can also view the dermatological patch test certificate for this product, explore the full Rosemary range, or browse all hair shampoos from Mamaearth.
Frequently Asked Questions
A: Yes. In this report, Lead (as Pb) and Arsenic (as As) were both reported Not Detected, each with a detection limit of 0.25 mg/kg, using test method STRC/STP/P018 at Sigma Test and Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193).
A: For the tested batch, the total microbial count and the total yeast and mould count were each reported as Less than 10 cfu/gm against limits of NMT 1000 and NMT 100 respectively (IS:14648:2011). Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans were all reported Absent. These results indicate the tested sample met the referenced microbiological limits; they do not establish overall product safety.
A: No. The report provides laboratory evidence for the specific parameters tested on a sample from the stated batch, such as heavy metals, microbiological quality and pH. It does not establish overall product safety, efficacy, or any performance or marketing claim, and it is not a product certification by NABL.
A: "Not Detected" means a substance was below the laboratory's stated detection limit using the specified analytical method, so it was not found at or above that limit in the tested sample. "Absent" means a specified microorganism was not detected in the tested quantity using the referenced method.
A: A ULR (Unique Lab Report) number is a one-of-a-kind identifier that NABL-accredited laboratories print on every test report, which makes the report traceable. The ULR for this report is TC1519325000001718F. The original report PDF linked on this page also carries the laboratory letterhead, a QR code and the authorised signatory details.
A: No. NABL accredits laboratories, not products. This page reports the results of testing performed at Sigma Test and Research Centre, an NABL-accredited laboratory (Accreditation No. TC-15193), on a sample of this product. It does not represent a product certification by NABL.
A: The report covers batch AAP5B144 (manufactured 02/2025, use before 24 months). The laboratory report states the tested sample quantity as 250 ml x 1 drawn from this batch. Results refer only to the tested sample and the parameters listed.
